Vauhti LF WET Liquid Easy Glide +10°...-1°C, 80ml

Vauhti LF WET liquid glide wax can be applied quick and easy way. It is based on the ingredients used in Vauhti race paraffin waxes and high-quality solvents, which give excellence performance and good durability to the product. 
LF WET optimum condition is from wet snow to damp snow down to zero degrees, it has a good dirt resistivity. On its best when used on top of Quick Base liquid primer. Liquid glide can be used on cross-country skis, alpine skis and snowboards.
One waxing endures even 40 km depending on the snow conditions.

Instructions for quick glides:
• Shake the bottle well.
• Press the sponge against the ski base and squeeze the bottle lightly, which makes the bottle valve open and the product can trickle onto the sponge.
• Apply a thick layer by rubbing it back and forth on the gliding surfaces.
• Allow to dry for approximately 10 min.
• Brush thoroughly, using a nylon brush.

Tips to improve the durability and glide sensitivity:
Tip 1.  Attach the dried product by rubbing with natural cork, you can also use a cork roller (= Roto cork).  Using cork will significantly improve the product’s durability. Brush the ski base thoroughly with a nylon brush; if necessary, use a fine-bristled metal brush first.
Tip 2.  Add Vauhti Fluorocarbon Block on ski base waxed with Quick Glide. Rub with natural cork or Roto cork, and brush thoroughly, using a nylon brush. The glide sensitivity of the ski will increase significantly.
Tip 3.  Rub a layer of Vauhti Fluorocarbon Block on the base, and apply a generous amount of quick glide on top of this layer, mixing the two products into one ”porridge”. Let dry completely; the longer, the better. Brush heavily, using a nylon brush. You can also extend durability by rubbing the “porridge” with a natural cork or a cork roller. Brush thoroughly with a nylon brush; if necessary, use a fine-bristled metal brush first.